Post by ParaMacGyver on Feb 5, 2009 14:41:03 GMT 10
The Mel Meter Model 8704 is an Intelligent microprocessor based instrument specifically designed for Paranormal Investigators & Enthusiasts. Several Important features have been incorporated into this durable, precision hand held instrument. All of them accessible with the meter being held in on hand.
Measures EMF & Temperature "Cold Spots" Simultaneously
That's right...the Mel Meter is the only Instrument that can do this. During their Investigations, an Investigator will often encounter an EMF change which is usually followed by a significant Temperature drop. Now, imagine being able to validate both changes simultaneously, and be able to track the source in real time with one hand in total darkness! No more fumbling for a flashlight to see the display in the dark.
Measures ELF Down to 30Hz!
It has been the generally accepted theory that spirits do emit an extremely low frequency (ELF) EM field, which commonly registers between 2.0 and 7.0 mG in strength. Typically, anything below 40Hz would be considered part of the ELF range. The Mel-8704 was designed to address this ELF range, and is actually 20Hz lower than a KII's 50Hz bandwidth.
Custom "Night View" Display
The Backlight display measures a full 2" x 1" with a 0.60" EMF display and 0.25" Ambient Temperature on the same screen. Both measurements can be read from 10' to 15' away.
The display can be turned On or OFF manually for display viewing in dark areas, and it is also bright enough so that it can be used in total darkness to navigate stairwells, corridors and door ways. Illumination of objects up to 8' away is possible with this special display once your eyes become adjusted to the light.
EMF "Burst Mode"
This feature allocates 100% of the micro-processors scan speed to monitor dynamic EMF changes. The display can update so quickly that your eyes will barley be able to keep up with it. If something is on the move, this feature can be activated with the push of a button. I like to use the "Record" function in this mode because it can capture the Min & Max measured values
So, if you have a EMF meter with a standard LCD display, get ready for a big change!
Mel-Cal
The Mel Meter is the only Intelligent EMF / Temperature device that uses a proprietary "Smart Calibration" function that allows the user to Calibrate the instrument in the field. Should the unlikely event ever occur, and the unit performs out of Spec. All you need to do is contact us and give us your serial number ID. We will provide you with a special code sequence to get your unit working in "Like New" condition again...it's that simple!
This is an awesome device that I do recommend, you can also purchase this from my website (sold with permission of Professional Measurement) www.creepyhollowgear.com for only $109.00 FREE SHIPPING
